「RAID Controllers」- LSI 9260-8i

  CREATED BY JENKINSBOT

LSI 9260-8i,512M 缓存,电池,6Gb,SAS 阵列卡

支持RAID级别:0/1/5/6/10/50/60

单盘,4T 6T 8T 10T 12T

SATA 线,一分4连接

x8 lane PCI Express 2.0 Compliant,当然也能够插在 x16 接口上,只是接口带宽只有一半。

问题:配置阵列

megaraid bios_如何使用新磁盘在MegaRAID BIOS中设置RAID0

1)Enter the Physical View; Choose the corresponding disk and press ENTER:
2)Choose the Make Unconf Good status and click Go:
3)Enter Configuration Wizard interface from the Home. If you want to keep the original configuration, choose Add configuration:
4)Choose Manual Configuration:
5)Choose your disk on the left, and click Add to array.
6)It will add the disks into a new group on the right. Then click Accept DG:

# 03/19/2021 在选择磁盘时,Backplane 会被默认选择,应该取消选择,否则会提示:

You cannot add Enclosures, Backplanes or Online drivers to the driver group. Please select only unconfigured good drivers.

问题:(FOREIGN) Slot: …

Unable to import foreign configuration / Deleted my MegaRAID array
Lenovo ThinkSystem RAID management tools article landing page – Lenovo Support TW

针对其他阵列迁移过来的磁盘,其存在先前的配置,所以会被标为 `(FOREIGN) Slot: …`;

需要先清理其配置,然后才能使用,否则不能参与阵列的组建;

在 Controller Properties 中,进行配置的清理;

补充说明:
1)在我们固件版本中,需要通过鼠标才能完成操作,无法通过键盘进行选择;在配置清除页面,甚至 Enter 键都无法正常工作;

参考文献

CAN A PCIE X8 CARD FIT IN X16 SLOT? – LEARN HERE